Tường lửa PA-220
PA-220
PALO ALTO
https://www.paloaltonetworks.com/network-security/next-generation-firewall/pa-220
Tình trạng: Còn hàng
Thông số kỹ thuật Palo Alto PA-220
| Performance and Capacities | |
| Firewall throughput (HTTP/appmix) | 575/540 Mbps |
| Threat Prevention throughput (HTTP/ appmix) | 275/320 Mbps |
| IPsec VPN throughput | 540 Mbps |
| Max sessions | 64,000 |
| New sessions per second | 4,300 |
| Storage Capacity | 32 GB eMMC |
| Networking Features | |
| Interface Modes | L2, L3, tap, virtual wire (transparent mode) |
| Routing | OSPFv2/v3 with graceful restart, BGP with graceful restart, RIP, static routing Policy-based forwarding Point-to-Point Protocol over Ethernet (PPPoE) Multicast: PIM-SM, PIM-SSM, IGMP v1, v2, and v3 |
| SD-WAN | Path quality measurement (jitter, packet loss, latency) Initial path selection (PBF) Dynamic path change |
| IPsec VPN | Key exchange: manual key, IKEv1, and IKEv2 (pre-shared key, certificate-based authentication) Encryption: 3DES, AES (128-bit, 192-bit, 256-bit) Authentication: MD5, SHA-1, SHA-256, SHA-384, SHA-512 |
| VLANs | 802.1Q VLAN tags per device/per interface: 4,094/4,094 |
| Network Address Translation | NAT modes (IPv4): static IP, dynamic IP, dynamic IP and port (port address translation) NAT64, NPTv6 Additional NAT features: dynamic IP reservation, tunable dynamic IP and port oversubscription |
| High Availability | Modes: active/active, active/passive Failure detection: path monitoring, interface monitoring |
| Environment | |
| Power Supply (Avg/Max Power Consumption) | Optional: dual redundant 40 W (21 W / 25 W) |
| Input Voltage (Input Frequency) | 100–240 VAC (50–60Hz) |
| Max Current Consumption | Firewall: 1.75 A @ 12 VDC Power supply (AC side): 1.5A |
| Dimensions | 1.62” H x 6.29” D x 8.07” W |
| Weight (Standalone Device/As Shipped) | 3.0 lbs / 5.4 lbs |
| Environment | Operating temperature: 32° to 104° F, 0° to 40° C Non-operating temperature: -4° to 158° F, -20° to 70° C Passive cooling |
