Industrial Multifunction VPN Router w/up to 2 LTE 4G + 2 serial ports + 4 Gigabit Ethernet (PoE) Switch + 2 WAN ports w/ Load Balancing, VPN, Protocol Gateway, Storage**; 24V input

• Up to 2 concurrent mobility for 3G/4G LTE Link&GPS(2L model/4 SIMs)
• Support LTE Cat 6 (APAC & EUNA models) or Cat 12/9/13 (WW model)
• PoE model built-in 4 Gigabit PoE at/af with budget 80W@12V/24V/48V
• VPN router for Multi-site VPN, OpenVPN, L2TP over IPsec, IPsec, L2 over GRE , IPGRE
• Load Balancing built-in 5 mechanisms
• Optional EMMC Flash storage on-board**
• Optional eSIM chip enables router with versatile data plans**
• Support NAT and Firewall
• Support Modbus gateway on serial ports
• Support 2 RS422/RS485 ports or 2x RS232 ports
• Input voltage selection 9~56VDC (24V model)
• Environmental monitoring for router inside info with voltage, current, temperature and total PoE load; LTE graphic signal strength
• Editable login page of captive portal for hot-spot application
• USB port to backup, restore the configuration file and upgrade firmware; Dual image firmware

OVERVIEW

Lantech I(P)MR-3004 series is a next generation industrial multi-function VPN router w/up to 2x LTE modem + 4x Gigabit Ethernet (PoE) switch + 2 WANs + 2 serial ports that supports advanced function of VPN, Load-balancing, Protocol gateway (Modbus), EMMC Flash Storage**, LTE quad SIM fail-over for industrial applications. The dual core CPU with 1.6GHz + 256M flash enables the router to multi-task smoothly.

Dual concurrent LTE design 4G/3G for load-balancing
With dual LTE module design (2L model), 4 SIM card slots, I(P)MR-3004 can allow auto-swap, failover & failback between multiple service providers for real non-stop connection. With concurrent LTE modules, it can also allocate bandwidth by “ Load Balancing with 8 schemes between multiple WANs.

With one mobile LTE module (1L model), 2 SIM card slots, I(P)MR-3004 provides redundant link between two service providers.

Both GPS and Russian GLONASS systems are supported.

Load Balancing with 5 mechanisms for multi-WANs
I(P)MR-3004 supports Load Balancing for LTE connections. There are five schemes for Load Balancing function:

2 port serial connection, Modbus gateway
It builds in 2 port serial connection for RS232, RS422, RS485.

The built-in Modbus gateway can convert Modbus RTU/ASCII to Modbus TCP for device control.

Optional EMMC Flash storage**
The optional EMMC flash storage on the router can offer 8G/16G/32G capacity.

Optional eSIM**
By replacing physical SIM, optional eSIM chip will allow users to purchase data plans at low prices from local carriers in the world.

VPN and firewall
Besides traditional VPN peer to peer tunneling, I(P)MR-3004 support latest Multi-Site VPN function that is an efficient way for mesh tunneling. The registration is under cloud service and encrypted by SSH makes the connection easy and safe.

It supports Multi-Site VPN, OpenVPN, L2TP over IPsec, IPsec, L2 over GRE , IPGRE, and NAT for various VPN applications.

The built-in Layer-4 firewall includes DDoS, IP address filter / Mac address filter / TCP/UDP port.

Support Routing Protocol: Static route / RIPv2 / OSPF / BGP / EIGRP
Lantech router series supports two routing methods: static routing and dynamic routing. Dynamic routing makes use of RIPv2, OSPF, EIGRP and BGP. The user can either choose one routing method to establish the routing table.

DIDO for alarm & email notice; Event log; Remote Web control
2 sets of DIDO function can support additional high/low physical contact for designate applications besides Port / Power events, for example, DIDO function can trigger alarm if the router was moved or stolen. In case of events, the I(P)MR-3004 will immediately send email and trap.

When the router is at remote area with limited access, Web control can help to get router status or remotely reboot.

Wide range input voltage from 9V-56VDC; PoE model built-in 4 port PoE at/af with 80W@12V /24V/48V
The I(P)MR-3004 is able to work from 9VDC to 56VDC and PoE model built-in PoE at/af with PoE budget 80W@12V /24V/48V that is particular good for vehicle, rail train, depot etc. application.

Environmental monitoring for inside router info& alerting; Graphic LTE signal strength
The built-in environmental monitoring can detect router ambient temperature, voltage, current and total PoE load where can send the SNMP traps syslog and email when abnormal.

The graphic LTE signal strength shows connection status at a glance.

USB port for back up, restore configuration and upgrade firmware; Dual image firmware
The built-in USB port can upload/download the firmware through USB dongle for router replacement

It support dual-image firmware to choose which one to start.

Dual image firmware
It supports dual-image firmware to choose which one to start.

Editable login page of captive portal
The I(P)MR-3004 supports editable captive portal function that allows administrator to force end-users redirect to authentication page.

Ruggedized industrial design and FCC, CE & E-marking** certificate
The I(P)MR-3004 is designed to meet with industrial network environment with IP 30 housing. It passed tests under extensive Industrial EMI and environmental vibration and shocks standards.

With CE & FCC radio certification for LTE and E-marking** certificate, the I(P)MR-3004 is best for outdoor community, vehicle, process control automation etc. For more usage flexibilities, I(P)MR-3004 supports wide operating temperature from -40°C to 65°C.

Built-in Managed Switch Function
Managed switch function is built-in and provides various L2+ functions for network aggregation deployment. It delivers ports and PoE management, VLAN, QoS, multicast, redundant ring, and security functions.

FEATURES

• Built-in 4 Gigabit switch + 2 WAN port
• PoE with  80W@12V /80W@24V&48V PoE budget
• EMMC-FLASH storage**8/16/32G
• eSIM** to allow data-plan globally
• 6 SMA type connectors for LTE, GPS
• HTTP/HTTPS/Telnet/SSH & Administration access
• Support IPv6 & IPv4 protocol
• Support Routing Protocol: Static route / RIPv2 / OSPF / BGP / EIGRP
• Support Multi-Site VPN for mesh tunneling as well as Open VPN, L2TP over IPsec, IPsec, L2 over GRE , IPGRE and NAT for secured network connection
• The built-in Layer-4 firewall includes DDoS, IP address filter / Mac address filter / TCP/UDP port number.
• Support SNMP v1/v2c/v3
• NAT/ DMZ/ Port Forwarding
• Dual concurrent LTE 4G/3G design (2L model)for auto-swap/failover/failback between multiple ISPs for continuous service (four SIM card slots)  
• One LTE 4G/3G w/ 2 SIM card design(1L model) for mobile redundancy
• GPS/ GLONASS  (support by LTE module) connection
• Load Balancing supports 5 mechanisms between multiple WANs


• Built-in 2 x serial ports(RS232/RS422/RS485)
• Supports 2DI / 2DO (Digital Input / Output)
• Built-in Modbus gateway converting Modbus RTU/ASCII to Modbus/TCP for serial ports
• Event alerting by Syslog, SNMP Trap, Email, Relay ; Permanent local log rotation / Maxi 1K records
• Remote Web control to get status or re-boot by Web
• Graphic LTE signal strength
• Support SNTP to synchronize system clock
• Support LLDP discovery protocol
• Support DHCP Server and Client
• Built-in environmental monitoring for system input voltage, current and ambient temperature; Able to set alert when abnormal
• Dual image firmware to choose which to start
• Firmware upgradeable through TFTP/HTTP
• Configuration backup and restoration
  • Supports text configuration file for system quick installation
  • USB port to upload/download firmware by USB dongle
• Reset button for factory default mode
• IP 30 housing for industrial environment
• DIN-Rail and Wall-mount** installation
• Operation temperature -40°C to 65°C