4G router F3X36
F3X36
Four-Faith
https://www.fourfaith.com/f3x36-fdd-lte-industrial-4g-router.html
Tình trạng: Còn hàng
Four-Faith LTE Wireless Router is a cellular router working under 4G FDD-LTE networks, and back compatible to 3G/2G networks.project operation can choose more convenient and economical network and flow rates according to the operation’s requirement.
Four-Faith LTE Wireless Router enable you to connect computers, laptops and other terminals by either wired or wireless connections to the internet, anywhere, anytime. Working in a very similar way to a conventional broadband except that the internet is accessed over the 4G network.
Industrial Application
Remote Data Monitor and Control
CCTV, security surveillance
Water, gas and oil flow metering and schedule
AMR (automatic meter reading)
Power station monitoring and control
Remote POS (point of sale) terminals, ATM,
Traffic signals monitor and control, Traffic info guidance
Oil field, weather forecast, environmental protection, street lamp monitoring and control
Early Warning of Mountain Torrent
Fleet management
Power distribution network supervision
Central heating system supervision
Weather station data transmission
Hydrologic data acquisition
Vending machine
Telemetry, SCADA
Vehicle logistics and diagnostics controlling
Parking meter and Taxi Monitor
Telecom equipment supervision (Mobile base station, microwave or optical relay station)
Support low-consumption mode, including sleep mode, scheduled online/offline mode, scheduled power-on/power-off mode(optional)
LTE Wireless Router support hardware and software WDT
Support auto recovery mechanism, including online detect, auto redial when offline to make LTE wireless router always online
Ethernet port: 1.5KV magnetic isolation
RS232/RS485/RS422(Optional)port: 15KV ESD protection
SIM/UIM port: 15KV ESD protection
Power port: reverse-voltage and overvoltage protection
Antenna port: lightning protection(optional)
Cellular Specification
Cellular Module |
Content |
Cellular Module |
Industrial cellular module |
Standard and Band |
Support: LTE FDD 2600/2100/1800/900/800MHz(Band 1/3/7/8/20)700/850/1700/1900/2100MHz (Band 2/4/5/13/17/25)(optional) |
Bandwidth |
LTE FDD(Download speed:100Mbps,upload speed:50Mbps) |
TX power |
<23dBm |
RX sensitivity |
<-93.3dBm |
WIFI Specification
Item |
Content |
Standard |
IEEE802.11b/g/n |
Bandwidth |
IEEE802.11b/g: 54Mbps (max) IEEE802.11n: 150Mbps (max) |
Security |
WEP, WPA, WPA2, etc. WPS (optional) |
TX power |
20dBm(11n),24dBm(11g),26dBm(11b) |
RX sensitivity |
<-72dBm@54Mpbs |
Hardware System
Item |
Content |
CPU |
Industrial 32bits CPU |
FLASH |
16MB(Extendable to 64MB) |
DDR2 |
128MB |
Interface type
Item |
Content |
WAN |
1 10/100 Mbps WAN port(RJ45), auto MDI/MDIX, 1.5KV magnetic isolation protection |
LAN |
4 10/100 Mbps Ethernet ports(RJ45), auto MDI/MDIX, 1.5KV magnetic isolation protection |
Serial |
1 RS232(or RS485/RS422) port, 15KV ESD protection Data bits: 5, 6 ,7, 8 Stop bits: 1, 1.5(optional), 2 Parity: none, even, odd, space(optional), mark(optional) Baud rate: 2400~115200 bps |
Indicator |
"Power", "System", "Online", "Alarm", " Local Network ", "WAN", "WIFI", "Signal Strength" |
Antenna |
Cellular: 2 Standard SMA female interface, 50 ohm, lighting protection(optional) WIFI: 1 Standard SMA male interface, 50 ohm, lighting protection(optional) |
SIM/UIM |
Standard 3V/1.8V user card interface, 15KV ESD protection |
Power |
Standard 3-PIN power jack, reverse-voltage and overvoltage protection |
Reset |
Restore the LTE wireless router to its original factory default settings |
|
Power supply
Item |
Content |
Standard Power |
DC 12V/1.5A |
Power range |
DC 5~36V |
Consumption |
<500mA (12V) |
Physical Characteristics
Item |
Content |
Housing |
Iron, providing IP30 protection |
Dimensions |
206x135x28 mm |
Weight |
790g |
Environmental Limits
Item |
Content |
Operating Temperature |
-35~+75ºC(-31~+167℉) |
Storage Temperature |
-40~+85ºC (-40~+185℉) |
Operating Humidity |
95% ( unfreezing) |