10/100/1000T (w/ PoE af/at) to 100/1000M SFP Industrial Switch Converter; 12V/48V/AC input

• IEEE802.3at PoE/PSE Feature (PoE model)
• Support auto-sensing LLF by DIP Switch / 10K bytes Jumbo Frames
• Dual speed SFP cage (100/1000MFX) set by DIP Switch
• Dual DC input power: 12V model (9.5~56VDC) ; 48V model(44~56VDC) , supports dual ±48VDC input (PoE model)
• Wide dual input DC range 10~54VDC w/Galvanic isolation (non-PoE DC model)
• Wide dual input AC range 18V~36VAC w/Galvanic isolation (non-PoE AC model)
• Ethernet Copper Port can work as PD mode (non-PoE-PD model)
• AREMA** part 11.5.1 compliance
• Operating Temperature Range from -40°C to 75°C(-E model)
• Remote enable/disable PoE feeding power through fiber (PoE model)

OVERVIEW

The Lantech I(P)GC-0101DSFP is an Industrial Converter converging from 10/100/1000BaseT to 100/1000M-FX dual speed (with 802.3at/af PoE support). It supports 10K jumbo frame.

Auto-sensing LLF and Power Fault LED setting by DIP switch
Featured with LLF (Link Loss Forwarding) function, Lantech I(P)GC-0101DSFP is able to auto cut off connection if one end of connection is down. When copper port disconnects, it will auto turn off fiber port. When fiber port disconnects, it will auto turn off copper port. Smart LLF function alert central side switch immediate remedy action when connection is lost. Power Fault LED can be off by DIP switch.

Remote enable/disable PoE feeding power through fiber (PoE model)
The PoE power transmission of IPGC-0101DSFP can react to the fiber connection status. The control center can simply cut off and then re-connect the fiber connection to re-boot the PoE device, such as a camera that is connected to IPGC-0101DSFP remotely.

PoE model: Dual DC input power
IPGC-0101DSFP supports dual input from 9.5V~56VDC (12V model) or 44V~56VDC, dual ±48VDC input (48V model) for various application including vehicle, railway, solar panel etc.

Non-PoE model: Dual power input from 10V~54VDC/18~36VAC with galvanic isolation
IGC-0101DSFP supports dual wide range input from 10V~54VDC and 18~36VAC (AC model) with galvanic isolation that is good for various application including vehicle, railway, solar panel etc.

PD model (Non-PoE): Copper Ethernet Port can work as powered device
The copper port can provide the correct classification to power source equipment (PSE) so that the PSE can source the right amount of power to the IGC-0101DSFP-PD.

Hardened industrial design with extended temperature range ; CE, FCC, LVD, AREMA** part 11.5.1 compliance
It provides ±2000V EFT and ±6000V ESD protection, which can reduce unstable situation caused by power line and Ethernet. It has high reliability and robustness coping with extensive EMI/RFI phenomenon, environmental vibration and shocks usually found in Automation, transportation, surveillance, Wireless backhaul, Semi-conductor factory and assembly lines. With CE, FCC, LVD and AREMA** part 11.5.1 verification, Lantech I(P)GC-0101DSFP is best for outdoor community, vehicle, railway, process control automation etc. For more usage flexibilities, I(P)GC-0101DSP-E supports wide operating temperature from -40°C to 75°C.

FEATURES

• System Interface/Performance
  • UTP to Fiber Media Converter
  • Dual speed SFP cage (100M/1000M)
  • RJ-45 port support Auto MDI/MDI-X Function
  • Auto Negotiation Speed, Half/Full Duplex
  • Jumbo Frame: 10Kbytes
• IEEE802.3at PoE/PSE Feature (PoE model)
• Ethernet Copper Port can work as PD mode (non-PoE-PD model)
• Supports Link Alarm
• Redundancy Power Input with Terminal Block
• Metal Housing with DIN Rail Design
• Optional Wall Mount Design
• 19 inch Rack-mount design (Optional mounting Kit / bracket are required)
• Power polarity auto-reverse* and protection
• Remote enable/disable PoE feeding power (PoE model)
• AREMA** part 11.5.1 compliance (-AMA models)
• Supports Wide Operating Temperature (-40°C~ 75°C;-E)

SPECIFICATIONS

Hardware Specifications